RE100 Information from the blog of Neo Performance Materials, a Wastewater Treatment Plant Chemicals Company.
Denser Drier Sludge
Phosphorus Removal and Sludge Management Removing phosphorus from wastewater usually involves use of a coagulant, especially if you have a low Total Phosphorus (TP) limit. Traditional coagulants, carried over from the water treatment side of the industry, are based on...
Neo WaterFX300 Protects Sensitive River while Aiding Expansion at Coppermine WRF
Growth can often be a double-edged sword for a water reclamation facility (WRF). With an expansion looming to double the capacity of their membrane bioreactor (MBR) facility, the Coppermine WRF was exploring ways to improve their phosphorus removal from wastewater....
Better Dewatering with Neo WaterFX
Crystals Beat Floc — Better Dewatering with Neo WaterFXRemoving phosphorus from wastewater can create large quantities of difficult to dewater sludge, driving up disposal costs. The cause is choosing the wrong coagulant. Traditional coagulants, iron or aluminum based,...
Eliminate weir scrubbing from your operator’s duties
Scrubbing weirs. No one likes to do it and, depending on your clarifier design, it can be downright dangerous. But there it is every spring and through the summer, that annoying algae hanging off your weirs, with its slimy green making the clarifiers look terrible....
The Wastewater pH Seesaw
Get Off The pH Seesaw The pH of your effluent is a standard parameter on every NPDES permit. But more than that, maintaining a pH in the neutral 6 to 8 range is critical to maintaining the biological treatment in your wastewater facility. Maintaining the alkalinity of...
